Products
SD ,SK,SP Deep Well Submersible Pump
The SD, SK, and SP series submersible pumps feature a tightly coupled design where the motor and pump body are connected via a sleeve shaft. A suction filter is installed between the pump and motor to effectively isolate impurities in the liquid. The entire assembly is submerged in the liquid being pumped, which helps prevent pump cavitation (an issue related to the height difference between the pump and the fluid surface). The submersible pump uses the centrifugal force generated by the motor-driven impeller to push fluid from underground to the surface. The application of the SD, SK, and SP series submersible pumps primarily consists of two components: surface components and underground components. The surface components include control cabinets, cables, transformers, etc., while the underground components include pipes, pumps, and other attachments. The surface components are connected to the underground components via delivery pipes that extend to the bottom of the well. The motor section of the submersible pump is typically installed below the hydraulic stage
Applications
*Groundwater pumping
*Residential water pumping
*Well water pumping
*Municipal water pumping
*Industrial water pumping
*Villa water supply
*Groundwater level reduction
*Water supply system
*Municipal water supply
*System pressurization
*Pipeline pressurization
*Sprinkler irrigation system
*Air conditioning system
*Fire protection system / Firefighting system
*Cooling circulation system *Irrigation
Pump Materials
SD Series: 3-inch & 4-inch fully plastic submersible pumps
SK Series: 4-inch plastic impeller with stainless steel volute casing submersible pumps
SP Series: 4-inch, 6-inch, 8-inch & 10-inch fully stainless steel submersible pumps
Motor
Protection Class: IP68
Insulation Class: F
Voltage: 3×220-240V / 380-415V
1×220-240V
Power Range: 0.37kW–2.2kW (single-phase motors available)
Pump Operating Conditions
Thin, clean, non-flammable, non-explosive liquid free from particles or fibers
Ambient temperature: Not exceeding +40°C
Altitude: Not exceeding 1000m
Submersion depth: 70m
ViRheos
